-
King Grip Edge Fix Sealant helps prevent any lifting of our anti-slip tapes in heavily traffic areas. Edge fix is applied onto both the substrate and the tape, it then shrinks into place effectively pressing dragging the material into place and holding it firm. The edge fix dispenser has an appearance similar to a large toothpaste tube; our nozzle is very fine and allows accurate dispensation. Only a small amount is required for our non slip stair treads, just enough to touch tape and substrate (only use after application not before). Edge fix sealer dries in around 10-15 minutes. One 5 fl oz tube seals 120 linear feet of non slip stair treads. -
King Grip Primer helps create an extra bond on porous surfaces prior to application. Primer helps to create a stable surface for our tape to adhere onto, on a porous surface (wood, concrete, stone, marble etc) moisture can travel through to the surface, this moisture can then lift the film. Simply brush down (only onto the area where you will be applying the non slip stair treads) like paint; it typically dries in 10~30 minutes dependent on application temperature and surface type. We offer the primer in either 34 fluid ounce (our most popular size) or 17 fluid ounce, a 34 fl oz container seals 50 square feet while 17 fl oz seals 25 square feet of our non slip stair treads. -
King Grip Primer helps create an extra bond on porous surfaces prior to application. Primer helps to create a stable surface for our tape to adhere onto, on a porous surface (wood, concrete, stone, marble etc) moisture can travel through to the surface, this moisture can then lift the film. Simply brush down (only onto the area where you will be applying the non slip stair treads) like paint; it typically dries in 10~30 minutes dependent on application temperature and surface type. We offer the primer in either 34 fluid ounce (our most popular size) or 17 fluid ounce, a 34 fl oz container seals 50 square feet while 17 fl oz seals 25 square feet of our non slip stair treads. -
King Grip Surface Cleaner helps to effectively clean surfaces before any of our grip tape is applied. This cleaner helps to remove contaminants by not leaving anything behind, such as greasy residue unlike methylated spirits, petrol etc. We recommend using a clean dry cloth then wiping in one direction on the surface, the reason why we prefer this to simply wiping in a windshield wiper motion is that the IPA will not destroy contaminants it simply lifts them and deposits them elsewhere so a simply one direction wipe will mean that they are left where you lift the cloth off. Supplied in a 32 fluid ounce bottle. -
King Grip Floor Signs are a highly visible, self-adhesive warehouse floor sign, made to notify staff and guests about restrictions or potential dangers. Constructed from a hard wearing, durable plastic that will withstand foot and forklift traffic, with a strong adhesive base applied to ensure that after application, they will hold fast and only be removed when you want them to be. Our warehouse floor markers can be used in various areas, and not only applied to floors, they can be applied to various walls and doors too if necessary, to make sure they are in the best view to notify your staff and guests. Various designs of our floor safety signs are suitable to apply in warehouse aisles to warn of foot or vehicle traffic, or in doorways to notify of restrictions when entering certain areas. -
King Grip Ribbed Rubber Tape is a non abrasive tape made with a ribbed finish for easy dispersion of water, such as in a toolbox, to prevent tools being submerged and damaged. Constructed from plastic, manipulated to feel like rubber, this tape will not harbor bacteria or retain water, making it very easy to clean. It comes in Black and comes in 5 different widths including (1”, 2”, 3”, 4” and 6") with a roll length of 60 feet.- High Traction Ribbed Surface with aggressive adhesive.
- OSHA, CoF Compliant.
- Water, chemical and wear resistance.
- Available in multiple widths to meet your needs.
- Simple and easy peel-&-stick installation.
-
King Grip Resilient Anti-Slip Tape is a non abrasive tape made to improve traction in places where bare feet will regularly come into contact with the floor. Constructed from plastic, manipulated to feel like rubber, this tape is pleasant to bare skin and will not harbor bacteria, making it very easy to clean for strict hygiene standards. It comes in Black or Yellow and comes in 5 different widths including (1”, 2”, 3”, 4” and 6"") with a roll length of 60 feet.- Ideal for baths, showers, pools, boats, and other marine surfaces.
- High Traction Surface with aggressive adhesive.
- OSHA, CoF Compliant.
- Water, chemical and wear resistance.
- Available in multiple widths to meet your needs.
- Simple and easy peel-&-stick installation.
-
King Grip Removable Hazard Anti-Slip Tape is excellent for use in areas that need a temporary anti-slip solution. With a 60 grit non-slip factor, this tape carries an incredibly strong adhesive that can easily be removed once it is no longer needed. It is available in Black & Yellow Hazard and comes in 5 different widths including (1”, 2”, 3”, 4” and 6"") with a roll length of 60 feet.- Ideal for short term events, without defacing the environment it is being held in.
- High Traction Surface with strong removable adhesive.
- OSHA, CoF Compliant.
- Temporary water and wear resistance.
- Available in multiple widths to meet your needs.
- Simple and easy peel-&-stick installation.
-
King Grip Removable Anti-Slip Tape is excellent for use in areas that need a temporary anti-slip solution. With a 60 grit non-slip factor, this tape carries an incredibly strong adhesive that can easily be removed once it is no longer needed. It is available in 2 colors (Black or Yellow) and comes in 5 different widths including (1”, 2”, 3”, 4” and 6"") with a roll length of 60 feet.- Ideal for short term events, without defacing the environment it is being held in.
- High Traction Surface with strong removable adhesive.
- OSHA, CoF Compliant.
- Temporary water and wear resistance.
- Available in multiple widths to meet your needs.
- Simple and easy peel-&-stick installation.
-
King Grip Reflective Tape is a glass bead, engineering grade, self-adhesive high visibility tape for marking out potentially hazardous or dangerous areas. This reflective safety tape is coated with a permanent high visibility adhesive layer, which allows for a long term bond, which will not break down in hazardous or testing conditions. A paper backing liner is applied to protect the PSA (pressure sensitive adhesive) prior to application. It is available in 2 industry required colors and comes in a 1” or 2” width with a roll length of 30 feet.- Ideal for marking out potentially hazardous or dangerous areas.
- Durable aisle tape with a tough permanent adhesive.
- Meets 5S Standards and is OSHA Compliant.
- Available in 6 colors and 2 widths to meet your needs.
- Simple and easy peel-&-stick installation.
-
King Grip Reflective Tape is a glass bead, engineering grade, self-adhesive high visibility tape for marking out potentially hazardous or dangerous areas. This reflective safety tape is coated with a permanent high visibility adhesive layer, which allows for a long term bond, which will not break down in hazardous or testing conditions. A paper backing liner is applied to protect the PSA (pressure sensitive adhesive) prior to application. It is available in 6 industry required colors and comes in a 1” or 2” width with a roll length of 30 feet.- Ideal for marking out potentially hazardous or dangerous areas.
- Durable aisle tape with a tough permanent adhesive.
- Meets 5S Standards and is OSHA Compliant.
- Available in 6 colors and 2 widths to meet your needs.
- Simple and easy peel-&-stick installation.
-
King Grip PermaTop Protection Tape is the perfect material for applying on top of existing line-markings that require extra protection.